描述
Condition: Complete / Working at removal Status: De-installed配置
STS Multiplex ICP AOE Pro Advanced Oxide Etcher (AOE) Etched: SiO2, quartz, Pyrex, fused silica, Si3N4, bulk silicon Masks: Si, PR & Metals (Cr, Ti, Ni) 3000W 13.56MHz AE – Coil 1000W 13.56MHz ENI – Platen Backside Helium Cooling with Standard 8-pin clamp & lip seal C4F8, SF6, O2, H2, CF4, two open gas slots 2-80mT Process Pressure Platen -20°C to 120°C, Walls 100°C, Lid 120°C 2.5µm isolated trenches on 8-10µm TEOS Etch rate greater than 2000Å/min SiO2, greater than 4:1 selectivity SiO2: PR, etch rate variability intra- and inter-wafer ±3%, sidewalls 85-90° 5µm features on 3-10µm SiO2 Etch rate greater than 3000Å/min SiO2, greater than 7.5:1 selectivity SiO2:PR, etch rate variability intra- and inter-wafer ±2%, sidewalls 89-90° Converted to 100mm w/ ceramic parts (from quartz)OEM 代工型號說明
The STS MULTIPLEX ICP is an etch system. The STS MULTIPLEX ICP can be used with 2” wafer sizes. It has a silicon material plate and ASE polymer system processer.文檔
無文檔
STS
MULTIPLEX ICP
已驗證
類別
Dry / Plasma Etch
上次驗證: 超過60天前
關鍵商品詳情
條件:
Used
作業狀態:
未知
產品編號:
111180
晶圓尺寸:
2"/50mm, 4"/100mm, 6"/150mm
年份:
未知
Have Additional Questions?
Logistics Support
Available
Money Back Guarantee
Available
Transaction Insured by Moov
Available
Refurbishment Services
Available
類似上架商品
查看全部
STS
MULTIPLEX ICP
類別
Dry / Plasma Etch
上次驗證: 超過60天前
關鍵商品詳情
條件:
Used
作業狀態:
未知
產品編號:
111180
晶圓尺寸:
2"/50mm, 4"/100mm, 6"/150mm
年份:
未知
Have Additional Questions?
Logistics Support
Available
Money Back Guarantee
Available
Transaction Insured by Moov
Available
Refurbishment Services
Available
描述
Condition: Complete / Working at removal Status: De-installed配置
STS Multiplex ICP AOE Pro Advanced Oxide Etcher (AOE) Etched: SiO2, quartz, Pyrex, fused silica, Si3N4, bulk silicon Masks: Si, PR & Metals (Cr, Ti, Ni) 3000W 13.56MHz AE – Coil 1000W 13.56MHz ENI – Platen Backside Helium Cooling with Standard 8-pin clamp & lip seal C4F8, SF6, O2, H2, CF4, two open gas slots 2-80mT Process Pressure Platen -20°C to 120°C, Walls 100°C, Lid 120°C 2.5µm isolated trenches on 8-10µm TEOS Etch rate greater than 2000Å/min SiO2, greater than 4:1 selectivity SiO2: PR, etch rate variability intra- and inter-wafer ±3%, sidewalls 85-90° 5µm features on 3-10µm SiO2 Etch rate greater than 3000Å/min SiO2, greater than 7.5:1 selectivity SiO2:PR, etch rate variability intra- and inter-wafer ±2%, sidewalls 89-90° Converted to 100mm w/ ceramic parts (from quartz)OEM 代工型號說明
The STS MULTIPLEX ICP is an etch system. The STS MULTIPLEX ICP can be used with 2” wafer sizes. It has a silicon material plate and ASE polymer system processer.文檔
無文檔