描述
無描述配置
Mask Aligner Karl SUSS MicroTec MA6 - UV lithography system Equipment: UV exposure at 365 nm, Backlight unit with NIR camera, Wafer chucks (transmitted light), mask holder, Accessories: LCPLAN FL 20x/0.40 lens, LMPLFLN 20x/0.40 lens, 11.25x0.16 lens (separation), Optometer without sensor with case, Mask holder MA6/BA6/BL/Cont/M-3, Mask holder MA6/BA6/BL/Prox/Cont, Sola-Check accessories, Chuck MA6/BA6/VAC/TEFFLON/W-100/S.OEM 代工型號說明
The MA6 has upgraded optics designed to output in the mid-UV (250nm) range. The lamp is controlled by a CIC 100 constant intensity controller capable of delivering user-selectable UV doses which remain stable during the life of the lamp. Optical sensors monitor the UV output dose and provide feedback to the controller. There are 2 selectable channels. Both channels operate the lamp near its “idle power” (475W) to maximize lamp life. Because the lamp operates in constant intensity mode, the actual power will vary over time as the lamp ages.文檔
無文檔
類別
Mask/Bond Aligners
上次驗證: 超過60天前
關鍵商品詳情
條件:
Used
作業狀態:
Deinstalled / Palletized
產品編號:
128496
晶圓尺寸:
未知
年份:
2001
Logistics Support
Available
Transaction Insured by Moov
Available
Refurbishment Services
Available
類似上架商品
查看全部
SUSS MicroTec / KARL SUSS
MA6
類別
Mask/Bond Aligners
上次驗證: 超過60天前
關鍵商品詳情
條件:
Used
作業狀態:
Deinstalled / Palletized
產品編號:
128496
晶圓尺寸:
未知
年份:
2001
Logistics Support
Available
Transaction Insured by Moov
Available
Refurbishment Services
Available
描述
無描述配置
Mask Aligner Karl SUSS MicroTec MA6 - UV lithography system Equipment: UV exposure at 365 nm, Backlight unit with NIR camera, Wafer chucks (transmitted light), mask holder, Accessories: LCPLAN FL 20x/0.40 lens, LMPLFLN 20x/0.40 lens, 11.25x0.16 lens (separation), Optometer without sensor with case, Mask holder MA6/BA6/BL/Cont/M-3, Mask holder MA6/BA6/BL/Prox/Cont, Sola-Check accessories, Chuck MA6/BA6/VAC/TEFFLON/W-100/S.OEM 代工型號說明
The MA6 has upgraded optics designed to output in the mid-UV (250nm) range. The lamp is controlled by a CIC 100 constant intensity controller capable of delivering user-selectable UV doses which remain stable during the life of the lamp. Optical sensors monitor the UV output dose and provide feedback to the controller. There are 2 selectable channels. Both channels operate the lamp near its “idle power” (475W) to maximize lamp life. Because the lamp operates in constant intensity mode, the actual power will vary over time as the lamp ages.文檔
無文檔