跳到主要內容
Moov logo

Moov Icon
DISCO DTG8460
    描述
    Backside grinder Details Attached
    配置
    (Qty 2) Load ports -3x Universal Chuck Table for 12” -Low vibration Air Bearing Spindle -Robotic Wafer Transportation System -Vacuum Pump System -GUI – Graphical Operation Panel and Video Display Unit -Electrical Unit & Main Body Lifting Jig Set -Signal Tower -Power: 200V 3 phase (without Transformer) -CE-mark and EMC conformity -English Operation/Trouble Shooting Manual -Standard Accessories - Duct Unit Assembly – filtration and air suction - Spindle Protection Device in case of air leakage switch to reserve air/N2 - Wafer Protection Device - hold Wafer during Vacuum leakage - UPS- Uninterruptable Power Supply (with English manual) - Disco Standard SECS / GEM Software lt. Protocol - T2 Pad Cleaning System (standard: universal, non ceramic !) - Software Modification Offset for Positioning Table - External water nozzle on Z1 + Z2 wheel with adjustable flow rate - Adjustable water flow on T2 Pad to avoid drying up of pad surface - Automatic Set-up of wheel and Chuck after wheel change - Ionizer on Spinner Station Water Temperature Unit DTU1531 Two separate temperature process cycles for Spindle cooling water and grinding water (without Transformer) Cooling Water System Spindle Motor (circulation type) -Temp. setting range of supplied water: 15 – 30°C -Temp. Accuracy Assurance Range: 20 to 25°C -Temp. fluctuation range of supplied water: +/- 0,5°C -Cooling capacity: 1.5 kW (at water temperature of 20°C) -Water pumping capacity: 15 L/min at 0.30/0.35 MPa Cutting Water System (waste type) -Temp. setting range of supplied water: 15 – 30°C -Temp. Accuracy Assurance Range: 20 to 25°C -Temp. fluctuation range of supplied water: +/- 0,5°C -Water pumping capacity 25 L/min at 0.27/0.29 MPa -Cooling capacity: 6.3 kW(possible to cool water of 25 L/min up to about 3.6°C) -Heating capacity 12.5 kW (possible to cool water of 25 L/min up to about 7.2°C) FOUP opener Unit Double Port with mapping system Applicable cassette: FOUP (SEMI compliant), FOSB (SEMI compliant), 300 mm/200 mm double slot cassette, 300 mm/200 mm DBG cassette, 200 mm open cassette (adapter required) Additional Cleaning and packing of machine and accessory in Cleanroom class 10.000
    OEM 代工型號說明
    未提供
    文檔
    verified-listing-icon

    已驗證

    類別
    Lapping, Polishing, Grinding

    上次驗證: 2 天前

    關鍵商品詳情

    條件:

    Used


    作業狀態:

    未知


    產品編號:

    154852


    晶圓尺寸:

    未知


    年份:

    2020


    Logistics Support
    Available
    Transaction Insured by Moov
    Available
    Refurbishment Services
    Available
    類似上架商品
    查看全部
    DISCO DTG8460

    DISCO

    DTG8460

    Lapping, Polishing, Grinding
    年份: 2020條件: 二手
    上次驗證2 天前

    DISCO

    DTG8460

    verified-listing-icon
    已驗證
    類別
    Lapping, Polishing, Grinding
    上次驗證: 2 天前
    listing-photo-8f66dd0e20bd4c898b4619bd39e17fc9-https://api-v2.moov.co/listingPhotos/395926/image/md.jpeg
    listing-photo-8f66dd0e20bd4c898b4619bd39e17fc9-https://api-v2.moov.co/listingPhotos/395927/image/md.jpeg
    listing-photo-8f66dd0e20bd4c898b4619bd39e17fc9-https://api-v2.moov.co/listingPhotos/395928/image/md.jpeg
    listing-photo-8f66dd0e20bd4c898b4619bd39e17fc9-https://api-v2.moov.co/listingPhotos/395925/image/md.jpeg
    關鍵商品詳情

    條件:

    Used


    作業狀態:

    未知


    產品編號:

    154852


    晶圓尺寸:

    未知


    年份:

    2020


    Logistics Support
    Available
    Transaction Insured by Moov
    Available
    Refurbishment Services
    Available
    描述
    Backside grinder Details Attached
    配置
    (Qty 2) Load ports -3x Universal Chuck Table for 12” -Low vibration Air Bearing Spindle -Robotic Wafer Transportation System -Vacuum Pump System -GUI – Graphical Operation Panel and Video Display Unit -Electrical Unit & Main Body Lifting Jig Set -Signal Tower -Power: 200V 3 phase (without Transformer) -CE-mark and EMC conformity -English Operation/Trouble Shooting Manual -Standard Accessories - Duct Unit Assembly – filtration and air suction - Spindle Protection Device in case of air leakage switch to reserve air/N2 - Wafer Protection Device - hold Wafer during Vacuum leakage - UPS- Uninterruptable Power Supply (with English manual) - Disco Standard SECS / GEM Software lt. Protocol - T2 Pad Cleaning System (standard: universal, non ceramic !) - Software Modification Offset for Positioning Table - External water nozzle on Z1 + Z2 wheel with adjustable flow rate - Adjustable water flow on T2 Pad to avoid drying up of pad surface - Automatic Set-up of wheel and Chuck after wheel change - Ionizer on Spinner Station Water Temperature Unit DTU1531 Two separate temperature process cycles for Spindle cooling water and grinding water (without Transformer) Cooling Water System Spindle Motor (circulation type) -Temp. setting range of supplied water: 15 – 30°C -Temp. Accuracy Assurance Range: 20 to 25°C -Temp. fluctuation range of supplied water: +/- 0,5°C -Cooling capacity: 1.5 kW (at water temperature of 20°C) -Water pumping capacity: 15 L/min at 0.30/0.35 MPa Cutting Water System (waste type) -Temp. setting range of supplied water: 15 – 30°C -Temp. Accuracy Assurance Range: 20 to 25°C -Temp. fluctuation range of supplied water: +/- 0,5°C -Water pumping capacity 25 L/min at 0.27/0.29 MPa -Cooling capacity: 6.3 kW(possible to cool water of 25 L/min up to about 3.6°C) -Heating capacity 12.5 kW (possible to cool water of 25 L/min up to about 7.2°C) FOUP opener Unit Double Port with mapping system Applicable cassette: FOUP (SEMI compliant), FOSB (SEMI compliant), 300 mm/200 mm double slot cassette, 300 mm/200 mm DBG cassette, 200 mm open cassette (adapter required) Additional Cleaning and packing of machine and accessory in Cleanroom class 10.000
    OEM 代工型號說明
    未提供
    文檔
    類似上架商品
    查看全部
    DISCO DTG8460

    DISCO

    DTG8460

    Lapping, Polishing, Grinding年份: 2020條件: 二手上次驗證:2 天前
    DISCO DTG8460

    DISCO

    DTG8460

    Lapping, Polishing, Grinding年份: 2025條件: 全新上次驗證:超過60天前
    DISCO DTG8460

    DISCO

    DTG8460

    Lapping, Polishing, Grinding年份: 0條件: 二手上次驗證:超過60天前