
描述
Multi-block resist coater/developer配置
Cassette block: (Qty 5) FOUP load ports Carrier RFID capability and pressure sensor on CSB Developer stacks 1, 2 and 4 (per stack): (Qty 2) developer cups sharing a common arm and (Qty 2) NTD cups with individual nozzle arms Temperature-controlled dispense: one MGP nozzle shared by the developer cups and one 2 mm NTD nozzle per NTD cup One ADR nozzle per stack and one N2-purged PDR nozzle per NTD cup One bevel rinse nozzle set per NTD cup and one backside rinse nozzle set per cup Bulk FSI developer supply, external thermal control in STHC and separate solvent-base drain Pre-plumbed for future FIRM field retrofit Coater stack 3 and top coater stack 5: Stack 3: (Qty 10) 1.2 mm resist nozzles, (Qty 10) 3 mL CRD dispense pumps and (Qty 10) single-bottle resist supplies Stack 5: (Qty 6) 1.2 mm resist nozzles, (Qty 6) 3 mL CRD dispense pumps and (Qty 6) single-bottle resist supplies Each stack: (Qty 4) coater cups with backside rinse, one temperature-controlled SRRC nozzle and (Qty 4) COT dispense detection systems Each stack: adjustable EBR angle, bulk FSI solvent dispense and version 2 bevel rinse nozzle Each stack: exhaust pressure control, exhaust duct and drain case cleaning, and external thermal control in STHC Thermal processing: (Qty 9) chilling adhesion stations (CADH) with plate-temperature-based wafer wedging detection Bubbler-type HMDS tank in the main process block Slim chill plate stations (SCPL) with vacuum-based wafer wedging detection Chill plate stations (CPL) with optical wafer wedging detection Chilling high-precision hot plate stations (CPRP) with plate-temperature-based wafer wedging detection and 0.1 mm ceramic proximity gap pins on the chilling arm Immersion and interface blocks: IPRB with IPRA wafer transfer arm (Qty 5) pre-immersion spin rinse stations (SRS), each with an IDR nozzle, N2 capability and an immersion edge nozzle (Qty 4) post-immersion rinse stations (PIR) with IDR nozzles and N2 IFBS with IRAI wafer transfer arm and pickup from both sides Environmental control: TEL system temperature and humidity controller (STHC) Shinwa unit controls system environment, chemical temperature and CPL temperature (Qty 2) return-air plenums Chemical supply and power: (Qty 2) chemical cabinets with HMDS canister, sub-operation panel and top-side facility connection Three-pump solvent supply, three-pump NTD supply, two-pump NTR supply and (Qty 2) three-pump developer supplies Dual-feed AC power box with two separate breakers and top-side facility connectionOEM 代工型號說明
It enables higher throughput, increases wafers per day, and improves overall equipment efficiency. Additionally, it also meets industry requirements for versatile lithography equipment capable of leading edge processes, including double patterning.文檔
無文檔
類別
Coaters & Developers
上次驗證: 昨日
關鍵商品詳情
條件:
Used
作業狀態:
未知
產品編號:
141942
晶圓尺寸:
12"/300mm
年份:
2015
Logistics Support
Available
Transaction Insured by Moov
Available
Refurbishment Services
Available
類似上架商品
查看全部TEL / TOKYO ELECTRON
LITHIUS Pro V-i
類別
Coaters & Developers
上次驗證: 昨日
關鍵商品詳情
條件:
Used
作業狀態:
未知
產品編號:
141942
晶圓尺寸:
12"/300mm
年份:
2015
Logistics Support
Available
Transaction Insured by Moov
Available
Refurbishment Services
Available
描述
Multi-block resist coater/developer配置
Cassette block: (Qty 5) FOUP load ports Carrier RFID capability and pressure sensor on CSB Developer stacks 1, 2 and 4 (per stack): (Qty 2) developer cups sharing a common arm and (Qty 2) NTD cups with individual nozzle arms Temperature-controlled dispense: one MGP nozzle shared by the developer cups and one 2 mm NTD nozzle per NTD cup One ADR nozzle per stack and one N2-purged PDR nozzle per NTD cup One bevel rinse nozzle set per NTD cup and one backside rinse nozzle set per cup Bulk FSI developer supply, external thermal control in STHC and separate solvent-base drain Pre-plumbed for future FIRM field retrofit Coater stack 3 and top coater stack 5: Stack 3: (Qty 10) 1.2 mm resist nozzles, (Qty 10) 3 mL CRD dispense pumps and (Qty 10) single-bottle resist supplies Stack 5: (Qty 6) 1.2 mm resist nozzles, (Qty 6) 3 mL CRD dispense pumps and (Qty 6) single-bottle resist supplies Each stack: (Qty 4) coater cups with backside rinse, one temperature-controlled SRRC nozzle and (Qty 4) COT dispense detection systems Each stack: adjustable EBR angle, bulk FSI solvent dispense and version 2 bevel rinse nozzle Each stack: exhaust pressure control, exhaust duct and drain case cleaning, and external thermal control in STHC Thermal processing: (Qty 9) chilling adhesion stations (CADH) with plate-temperature-based wafer wedging detection Bubbler-type HMDS tank in the main process block Slim chill plate stations (SCPL) with vacuum-based wafer wedging detection Chill plate stations (CPL) with optical wafer wedging detection Chilling high-precision hot plate stations (CPRP) with plate-temperature-based wafer wedging detection and 0.1 mm ceramic proximity gap pins on the chilling arm Immersion and interface blocks: IPRB with IPRA wafer transfer arm (Qty 5) pre-immersion spin rinse stations (SRS), each with an IDR nozzle, N2 capability and an immersion edge nozzle (Qty 4) post-immersion rinse stations (PIR) with IDR nozzles and N2 IFBS with IRAI wafer transfer arm and pickup from both sides Environmental control: TEL system temperature and humidity controller (STHC) Shinwa unit controls system environment, chemical temperature and CPL temperature (Qty 2) return-air plenums Chemical supply and power: (Qty 2) chemical cabinets with HMDS canister, sub-operation panel and top-side facility connection Three-pump solvent supply, three-pump NTD supply, two-pump NTR supply and (Qty 2) three-pump developer supplies Dual-feed AC power box with two separate breakers and top-side facility connectionOEM 代工型號說明
It enables higher throughput, increases wafers per day, and improves overall equipment efficiency. Additionally, it also meets industry requirements for versatile lithography equipment capable of leading edge processes, including double patterning.文檔
無文檔