Description:
The CX5000S/13.56 RF amplifier operates at a frequency of 13.56 MHz. The power source produces maximum transfer of power into a 50 ohm resistive load and is designed to withstand large deviations in load impedance without failure. The primary features of the CX5000S series are its solid-state design, small physical size and reliability.

CX5000S series power amplifiers can be supplied with internal frequency sources or may be driven from external frequency sources having a 50 ohm output and a digital drive level of 0-5 V.

The CX5000S series amplifier is constructed with two sections:
-The DC power section is contained in a separate 10.5”(267mm) x 19”(483mm) rack unit. This section includes all of the filter capacitors, rectifiers and regulators as well as the three-phase 208 VAC power transformer. The bridge rectifiers are mounted on a water-cooled heatsink. These components are operated at about half of their rated outputs to insure the high reliability of this section.
-The RF section of the amplifier is mounted in a separate 5.25”(133mm) x 19” (483) rack unit. This section consists of the internal/external oscillator frequency control board (OCB), water-cooled driver, four water-cooled PA1250S power amplifiers, an RF combiner, and an output matching network/harmonic filter. All components are used well below their dissipation ratings for long life and low maintenance operation.

COMDEL

CX-5000S

comdelcx5000sdcrefurbrfgenerator.jpg

comdelcx5000sdcrefurbrfgenerator2.jpg

comdelcx5000sdcrefurbrfgenerator3.jpg

comdelcx5000sdcrefurbrfgenerator4.jpg

comdelcx5000sdcrefurbrfgenerator5.jpg

comdelcx5000sdcrefurbrfgenerator6.jpg

comdelcx5000sdcrefurbrfgenerator7.jpg

comdelcx5000sdcrefurbrfgenerator8.jpg

comdelcx5000sdcrefurbrfgenerator9.jpg

COMDEL

CX-5000S

Power Supplies

類似上架商品

CX-5000S

Power Supplies

類似上架商品