Bühler / BUEHLER

ECOMET 3000

ECOMET III

ISOMET 4000

ECOMET 30

PHOENIX 4000

The MPC™ 2000 Integrated Circuit Cross-Sectioning Semi Automated System is designed to accurately remove a pre-specified amount of material from microelectronic devices, and micro-components. Accurate cross-sectioning within +/-1um of a target feature is possible due to a combination of the precision power head, the low run-out tri-point drive plate, and the lapped, stainless-steel precision platen.This high accuracy reduces the possibility of grinding beyond the target plane which would be detrimental in failure analysis work.

MPC 2000

41-1500-160

ECOMET IV

METASERV 3000

ECOMET  V

ECOMET VI

CLUSTAL X

BETA

The AutoMet line of grinder and polisher machines are built for demanding production lab environments. The AutoMet 250 is designed for manual or automated sample preparation. Simplicity is balanced with versatility to accommodate many applications.

AutoMet 250

Automatic, Manual, or SmartCut control Linear Blade Feed

IsoMet High Speed

ECOMET  4000

ENVIRONMET

FIBRMET

The SimpiMet XPS1 is an electrohydraulic Automatic Compression Mounting System that brings fast cycle times to the specimen mounting process. This efficiency is delivered by optimizing the
typical heating and cooling steps in the mounting process.

SimpliMet XPS1

SAMPLEMET  I

ECOMet 250

BETA 49-5100-115

VIBROMET  III

POWERPRO  4000

POLIMET

MINIMET

49-3001-160	

MICROMET  II

HandiMet 2

Single & Twin Grinder-Polishers Vector & Vector LC 250 Power Heads

METASERV 250

PHOENIX BETA

The MiniMet 1000 semi-automatic grinder/polisher is a low volume, single specimen machine capable of preparing a wide variety of materials. The MiniMet 1000 prepares a wide variety of materials using the three self-contained preparation bowls and easy-touch panel controls. This semiautomatic grinder-polisher uses space saving design employs geometric action, increasing specimen consistency.

MINIMET 1000

DUOMET II

The PetroThin Thin Section Machine is a versatile, 8in [203mm] tabletop cutter and grinder, perfectly suited for crafting thin sections of a wide range of materials, including bone, ceramics, concrete, petrographic samples, and more.

PETRO-THIN

ECOMET II

EcoMet 300 Pro

SURFMET  I

Cutting machine is a precision sectioning saw that is designed for cutting various types of materials with minimal deformation. This low speed precision cutter is targeted for delicate parts by only using gravity fed force.

IsoMet Low Speed

ISOMET 5000

Metallurgical Wet Type Abrasive Sample Cut-Off Saw

OSCILLAMET

ISOMET 2000

Precision sectioning saw is designed for cutting various types of materials with minimal deformation.

ISOMET 1000

5000

the VibroMet 2 vibratory polisher, with a large, 12in [305mm] working surface for multiple samples, is designed to prepare high quality polished surfaces for a wide variety of applications, including EBSD analysis. The horizontal oscillation technique produces exceptional flatness and a stress-free surface without need for the hazardous electrolytes required by electro-polishers.

VIBROMET II

METASERV 2000

12-1513

ELECTROMET  IV

Technology: Plasma-assisted reactive magnetron -sputtering (PARMS/ PARMS+)
Applications: MF sputtering (optional: RF, DC sputtering) MF sputtering
Coating material: SiO2, Al2O3, Nb2O5, Ta2O5, HfO2, ZrO2, HfO2, Si3N4, ITO, Al, Ag, SiH
Capacity: 12* pcs. at Ø 200 mm / 8”

HELIOS 800

ARES 1100

TECHMET

PHOENIX  ALPHA

Bühler / BUEHLER

概述

活躍中的上架商品

全部產品

服務

最熱門的產品

ECOMET 3000

ECOMET III

ISOMET 4000

ECOMET 30

利用 Moov 將其上架並立即找到完美的買家。

所有產品

查看所有上架商品